VNG-E Universal Tensile Tester | Brugger Feinmechanik
Brugger Feinmechanik’s VNG- E is for testing films. This tester is used to determine the bond strength, seam strength and the friction of packaging materials.
Description
VNG-E Universal Tensile Tester | Brugger Feinmechanik
Brugger Feinmechanik’s VNG- E is for testing films. This tester determines the bond strength, seam strength and the friction of packaging materials.
- Tensile testing for films
- Control over PC
- Incl. evaluation software
How it works
This compact universal tester is for testing flexible materials, such as paper or plastic films, as well as laminated materials produced therewith. You can use a single device to determine all relevant material properties.
This tensile-testing machine determines the bond strength, seam strength and the slip of packaging materials. The software allows you to store your results to a database for documentation purposes. Standard film strips for testing the bond strength and seam strength as well as tensile strength may be prepared with our Strip Cutter (STR) according to applicable industry standards.
The software allows you to control the following tasks:
- Setting parameters for different test procedures
- Starting and exiting of different test procedures
- Viewing a graphical representation of the test procedures
- Printing charts with the test graph
- Saving your results in Microsoft Access databases
- Retrieving data from previous tests
Additional information
| Mechanism | stepper motor |
|---|---|
| Load cell | 100 N DMA load cell (bridge circuit); Digital evaluation |
| Measuring range (force) | max 100 N (200 N upon request) |
| Clamping width of the sample | up to 20 mm |
| Gauge length | 0 mm up to 400 mm |
| resolution | 0.01 mm |
| PC interface | Serial standard interface RS232, 115200 Baud |
| Dimensions | 71 x 50 x 27 cm |
| Weight | 27 kg |
| Storage temperature | 0 °C – 50 °C |
| Test temperature | 15 °C – 30 °C |
| Relative humidity | max. 80 %, non-condensing |
| Electrical connection VNG-E | 110-240 V / 50 – 60 Hz, power consumption ca. 20 W, approx. |
| Electrical connection PC | 110-240 V / 50 – 60 Hz, power consumption max. 350 W, approx. |
| Standard | – |
| DIN 55543-5:2017-10 | Packaging Test – Test methods for packaging films – Part 5: Determination of adhesion strength |
| 55529:2012-09 | Packaging – Determining the sealed-seam strength of sealings made of flexible packaging material |
| ISO 8295 | Plastics – Film and sheeting – determination of coefficients of friction |
| DIN EN ISO 527-1 | Determination of tensile properties (Part 1: General principles) |
| DIN EN ISO 527-3 | Test conditions for films and sheets |
Related products
-
Accessories, Brugger Feinmechanik
Hot Tack Attachment for Brugger HSG SeriesHot Tack Attachment for Brugger HSG Series
-
Brugger Feinmechanik, Sealing Testing
NDS Low-Pressure Heat Sealer | Brugger FeinmechanikNDS Low-Pressure Heat Sealer | Brugger Feinmechanik
-
Brugger Feinmechanik, Permeation Testing
GTT Gas-Transmission-Tester | Brugger FeinmechanikGTT Gas-Transmission-Tester | Brugger Feinmechanik